Jump to content

Featured Replies

I had to take out my internal stairs to give me more living space upstairs and I'm using the stairs as my downstairs bar. See if you can find an 'L' shaped already removed timber staircase and chuck it on a base of brinks and you've got yourself an instant bar! I'm having a crack at a pizza oven now. In Queensland we can eat outside during winter.

thats not a bad idea that.... mind you i have absolutely no idea how.

I wish I had two garage's.

Hello Redleg.

yep, lucky man i am. the people i bought the house from used it as a kids room.

 
  • Author

anyone know how to build a timber bar for my spare garage so i can sit there drink beer and watch tv?

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

Edited by Redleg

  • Author

In that case, I think I will make my first appearance at Casey for 2011. See you there Fan and Redleg.

Looking forward to it. Could you organize outside heaters please.

 
  • Author

I heard it sucks.

(Sigh) Delete this too...

Since I think you have learned the error of your ways and you are generally so positive in your posting, you have been awarded the Redleg daily exemption pass, which allows for posting on this thread. Congratulations, keep up the good work.


  • Author

In Queensland we can eat outside during winter.

Yes, but you have to drink 4X and watch bloody rugby on the TV.

  • Author

I wish I had two garage's.

Hello Redleg.

Hello to you to High Tower.

In that case, I think I will make my first appearance at Casey for 2011. See you there Fan and Redleg.

No talk of Lord Voldemort.. he who must not be named.....

 

TS is a wonderful poet .

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

holy crap!

my bar should be an L shape - about 2m for the bottom of the L and probably about 3 for the long part of the L - im yet to measure - and itll be on a concrete floor. ill also need a bit of a shelf on the "inside" of the bar but that should be easy enough with some brackets...

how would i make sure the thing didnt fall over? should i use some glue on the concrete floor or something? haha yeah i really have no idea what im doing...


Since I think you have learned the error of your ways and you are generally so positive in your posting, you have been awarded the Redleg daily exemption pass, which allows for posting on this thread. Congratulations, keep up the good work.

Yay!

I can't make it Sunday but the outdoor heaters are around the $300 mark at Bunnings.

So you might want to do the old "it doesn't work so can I please I have my money back" trick on Monday.

Store credit?

That's a hell of alot of light bulbs...

Edited by rpfc

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

This is...wow.

I hope this is a cut and paste job.

That's impressive.

  • Author

G'day Redleg, going Sunday??

Mrs. Redleg has just given me the green light and I will be there at Casey on sunday to inform and entertain as usual.

  • Author

holy crap!

my bar should be an L shape - about 2m for the bottom of the L and probably about 3 for the long part of the L - im yet to measure - and itll be on a concrete floor. ill also need a bit of a shelf on the "inside" of the bar but that should be easy enough with some brackets...

how would i make sure the thing didnt fall over? should i use some glue on the concrete floor or something? haha yeah i really have no idea what im doing...

A good solution to make sure the bar doesn't fall over is to have two people leaning on it from opposite sides. Preferably they should be of similar weight.


Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

THAT'S GOING STRAIGHT TO THE POOL ROOM!

CATON_WEB_PHOTO_NN567174_106261.JPG

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

Yes, but you have to drink 4X and watch bloody rugby on the TV.

Little Creatures all the way for me and I'm proud to say I was the only Queenslander (after 22 years I'm now comfortable saying that) not to watch the origin decider on Wednesday night! I'm a bit disappointed you didn't throw our lack of daylight savings in my face. I have no response to that!

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

$4.30 - that's highway robbery, especially for a terrible one. Was that a tall or regular ?

$3.40 gives me the heart starter (*cough*) I need. Lavazza. If anyone can better that I'm reading (as opposed to listening).

Disclaimer - Excessive caffiene intake is not recommended.

Where I am in Tom Price in WA paying $4.30 for a coffee would make my day, Just went into town to get some lunch and a mocha coffee (hot) chips and gravy and a cream roll $24. Got to love small mining towns lol


they call me Nutbean "two sheds" Jackson

  • Author

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

You got ripped off twice then, the price and the taste.

 

I think "Lookout Mama, Theres a white boat comin up the river!" is the best opening line of any song.

  • Author

I'm a bit disappointed you didn't throw our lack of daylight savings in my face. I have no response to that!

That's because I am a nice guy.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Featured Content

  • WHAT’S NEXT? by The Oracle

    What’s next for a beleagured Melbourne Football Club down in form and confidence, facing  intense criticism and disapproval over some underwhelming recent performances and in the midst of a four game losing streak? Why, it’s Adelaide which boasts the best percentage in the AFL and has won six of its last seven games. The Crows are hot and not only that, the game is at the Adelaide Oval; yet another away fixture and the third in a row at a venue outside of Victoria. One of the problems the Demons have these days is that they rarely have the luxury of true home ground advantage, something they have enjoyed just once since mid April. 

    • 2 replies
  • REPORT: Gold Coast

    From the start, Melbourne’s performance against the Gold Coast Suns at Peoples First Stadium was nothing short of a massive botch up and it came down in the first instance to poor preparation. Rather than adequately preparing the team for battle against an opponent potentially on the skids after suffering three consecutive losses, the Demons looking anything but sharp and ready to play in the opening minutes of the game. By way of contrast, the Suns demonstrated a clear sense of purpose and will to win. From the very first bounce of the ball they were back to where they left off earlier in the season in Round Three when the teams met at the MCG. They ran rings around the Demons and finished the game off with a dominant six goal final term. This time, they produced another dominant quarter to start the game, restricting Melbourne to a solitary point to lead by six goals at the first break, by which time, the game was all but over.

    • 0 replies
  • CASEY: Gold Coast

    Coming off four consecutive victories and with a team filled with 17 AFL listed players, the Casey Demons took to their early morning encounter with the lowly Gold Coast Suns at People First Stadium with the swagger of a team that thought a win was inevitable. They were smashing it for the first twenty minutes of the game after Tom Fullarton booted the first two goals but they then descended into an abyss of frustrating poor form and lackadaisical effort that saw the swagger and the early arrogance disappear by quarter time when their lead was overtaken by a more intense and committed opponent. The Suns continued to apply the pressure in the second quarter and got out to a three goal lead in mid term before the Demons fought back. A late goal to the home side before the half time bell saw them ten points up at the break and another surge in the third quarter saw them comfortably up with a 23 point lead at the final break.

    • 0 replies
  • PREGAME: Rd 17 vs Adelaide

    With their season all over bar the shouting the Demons head back on the road for the third week in a row as they return to Adelaide to take on the Crows. Who comes in and who goes out?

    • 189 replies
  • POSTGAME: Rd 16 vs Gold Coast

    The Demons did not come to play from the opening bounce and let the Gold Coast kick the first 5 goals of the match. They then outscored the Suns for the next 3 quarters but it was too little too late and their season is now effectively over.

      • Thanks
      • Like
    • 231 replies
  • VOTES: Rd 16 vs Gold Coast

    Max Gawn has a massive lead in the Demonland Player of the Year award ahead of Jake Bowey, Christian Petracca, Clayton Oliver and Kysaiah Pickett. Your votes please. 6, 5, 4, 3, 2 & 1.

      • Vomit
      • Shocked
      • Clap
      • Haha
    • 41 replies