The No T$ No B$ Thread

[biggestred 4,244]

I had to take out my internal stairs to give me more living space upstairs and I'm using the stairs as my downstairs bar. See if you can find an 'L' shaped already removed timber staircase and chuck it on a base of brinks and you've got yourself an instant bar! I'm having a crack at a pizza oven now. In Queensland we can eat outside during winter.

thats not a bad idea that.... mind you i have absolutely no idea how.

I wish I had two garage's.

Hello Redleg.

yep, lucky man i am. the people i bought the house from used it as a kids room.

[Redleg 37,447]

anyone know how to build a timber bar for my spare garage so i can sit there drink beer and watch tv?

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

Edited July 8, 2011 by Redleg

[Redleg 37,447]

In that case, I think I will make my first appearance at Casey for 2011. See you there Fan and Redleg.

Looking forward to it. Could you organize outside heaters please.

[Redleg 37,447]

I heard it sucks.

(Sigh) Delete this too...

Since I think you have learned the error of your ways and you are generally so positive in your posting, you have been awarded the Redleg daily exemption pass, which allows for posting on this thread. Congratulations, keep up the good work.

[Slartibartfast 15,715]

I heard it sucks.

(Sigh) Delete this too...

(sigh) done.....

[Redleg 37,447]

In Queensland we can eat outside during winter.

Yes, but you have to drink 4X and watch bloody rugby on the TV.

[Redleg 37,447]

I wish I had two garage's.

Hello Redleg.

Hello to you to High Tower.

[Slartibartfast 15,715]

In that case, I think I will make my first appearance at Casey for 2011. See you there Fan and Redleg.

No talk of Lord Voldemort.. he who must not be named.....

[Captain Jack Jordan 32]

TS is a wonderful poet .

[biggestred 4,244]

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

holy crap!

my bar should be an L shape - about 2m for the bottom of the L and probably about 3 for the long part of the L - im yet to measure - and itll be on a concrete floor. ill also need a bit of a shelf on the "inside" of the bar but that should be easy enough with some brackets...

how would i make sure the thing didnt fall over? should i use some glue on the concrete floor or something? haha yeah i really have no idea what im doing...

[rpfc 27,383]

Since I think you have learned the error of your ways and you are generally so positive in your posting, you have been awarded the Redleg daily exemption pass, which allows for posting on this thread. Congratulations, keep up the good work.

Yay!

I can't make it Sunday but the outdoor heaters are around the $300 mark at Bunnings.

So you might want to do the old "it doesn't work so can I please I have my money back" trick on Monday.

Store credit?

That's a hell of alot of light bulbs...

Edited July 8, 2011 by rpfc

[rpfc 27,383]

Step 1: Construct Side Frames

Each of the two side panels is constructed from two long and two short boards. Use a circular saw to cut four 2" x 4" boards to lengths of 42". Next, cut four 2" x 4" boards to lengths of 15". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 2: Construct Front Frame

Use a circular saw to cut two 2" x 4" boards to lengths of 42". Next, cut two 2" x 4" boards to lengths of 84". Place the shorter boards inside the longer ones to form a rectangular frame. Secure the boards with nails.

Step 3: Cut Front and Side Panels

Use a table saw to cut two pieces of MDF to fit over the side panels. Next, cut one piece of MDF to fit over the front panel. Apply glue to the edges of the front and side MDF panels and fasten to the frames with nails.

Step 4: Assemble Bar

The side panels connect to the front panel via two 4" x 4" posts. Cut two 4" x 4" posts to lengths of 42". Position one side panel and the front panel at a 45-degree angle with one post at the intersection. Toenail the pieces together to form one bar corner. Repeat with remaining corner.

Step 5: Construct Bartop

Cut a piece of MDF to dimensions slightly larger than the bar to allow for overhang. In this project that would be 21" x 86". Apply glue to the underside of the MDF bartop and fasten to the front and side panels with nails.

Step 6: Complete Project

Paint or stain the wood as desired to give the bar a finished look.

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

Glad to be of help. Next!

This is...wow.

I hope this is a cut and paste job.

That's impressive.

[Redleg 37,447]

G'day Redleg, going Sunday??

Mrs. Redleg has just given me the green light and I will be there at Casey on sunday to inform and entertain as usual.

[Redleg 37,447]

holy crap!

my bar should be an L shape - about 2m for the bottom of the L and probably about 3 for the long part of the L - im yet to measure - and itll be on a concrete floor. ill also need a bit of a shelf on the "inside" of the bar but that should be easy enough with some brackets...

how would i make sure the thing didnt fall over? should i use some glue on the concrete floor or something? haha yeah i really have no idea what im doing...

A good solution to make sure the bar doesn't fall over is to have two people leaning on it from opposite sides. Preferably they should be of similar weight.

[biggestred 4,244]

hahahahaha god i just lost it

[Curry & Beer 5,444]

Finally put picture of Melbourne team on the bar or hanging over it and clutter room with other Melbourne memorabilia.

THAT'S GOING STRAIGHT TO THE POOL ROOM!

[Jaded No More 57,583]

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

[Goodvibes 3,596]

Yes, but you have to drink 4X and watch bloody rugby on the TV.

Little Creatures all the way for me and I'm proud to say I was the only Queenslander (after 22 years I'm now comfortable saying that) not to watch the origin decider on Wednesday night! I'm a bit disappointed you didn't throw our lack of daylight savings in my face. I have no response to that!

[H_T 2,941]

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

$4.30 - that's highway robbery, especially for a terrible one. Was that a tall or regular ?

$3.40 gives me the heart starter (*cough*) I need. Lavazza. If anyone can better that I'm reading (as opposed to listening).

Disclaimer - Excessive caffiene intake is not recommended.

[kegs 0]

Where I am in Tom Price in WA paying $4.30 for a coffee would make my day, Just went into town to get some lunch and a mocha coffee (hot) chips and gravy and a cream roll $24. Got to love small mining towns lol

[nutbean 8,837]

they call me Nutbean "two sheds" Jackson

[Jerry Lundergard 380]

I really like the Renegades team, but they play at shittyhad....Might have to jump on the Stars.

[Redleg 37,447]

I just had a terrible coffee and it cost me $4.30.

Also, this thread is by far the most interesting thing I've read today.

You got ripped off twice then, the price and the taste.

[Damo 2,969]

I think "Lookout Mama, Theres a white boat comin up the river!" is the best opening line of any song.

[Redleg 37,447]

I'm a bit disappointed you didn't throw our lack of daylight savings in my face. I have no response to that!

That's because I am a nice guy.